Stromspeicher 2026: Warum er mit Wärmepumpe so wichtig ist – und welche Systeme im Test vorne liegen
Wer eine Photovoltaikanlage hat oder plant, steht früher oder später vor der Frage: Brauche ich einen Stromspeicher? Mit einer Wärmepumpe im Haus wird die Frage noch wichtiger. Hier steht, warum sich das Verhältnis zwischen Einspeisen und Selbstverbrauchen gerade grundlegend verschiebt, was ein Speicher leisten kann und was nicht, und welche Systeme im unabhängigen Test vorne liegen. Stand: 01.10.2026.
Warum der Speicher wichtiger geworden ist
1. Einspeisen bringt kaum noch etwas
| Wert je kWh | |
|---|---|
| Einspeisevergütung, neue Anlage bis 10 kWp mit Eigenverbrauch (ab 01.08.2026) | 7,70 ct |
| Strom aus dem Netz, Haushalte, Durchschnitt 1. Halbjahr 2026 (Destatis) | 37,97 ct |
| Günstige Neukundentarife (September 2026) | ca. 30 ct |
Jede Kilowattstunde Solarstrom, die Sie selbst verbrauchen, ist also etwa vier- bis fünfmal so viel wert wie eine eingespeiste. Ohne Speicher fließt der Mittagsstrom größtenteils ins Netz, und abends kaufen Sie teuer zurück.
2. Neue Regeln machen das Einspeisen unattraktiver
- Keine Vergütung bei negativen Strompreisen: Für Anlagen, die seit dem 25.02.2025 in Betrieb gegangen sind, entfällt die Einspeisevergütung in Stunden mit negativen Börsenpreisen. Das sind gerade die sonnigen Mittagsstunden. Der Vergütungszeitraum verlängert sich dafür hinten heraus.
- Begrenzte Einspeisung ohne Steuerung: Neue Anlagen ohne intelligentes Messsystem und Steuerungseinrichtung dürfen nur einen Teil ihrer Leistung ins Netz abgeben. Was darüber hinausgeht, geht ohne Speicher verloren.
- Mögliche EEG-Reform 2027: Diskutiert wird, die feste Einspeisevergütung für Neuanlagen ab 2027 abzuschaffen. Beschlossen ist das noch nicht. Die Richtung ist aber klar: Selbstverbrauch schlägt Einspeisung.
3. Mit Wärmepumpe und E-Auto steigt der eigene Verbrauch
Eine Wärmepumpe verbraucht im Einfamilienhaus oft 3.000 bis 7.000 kWh Strom im Jahr. Je mehr davon aus der eigenen Anlage kommt, desto günstiger heizen Sie. Das Fraunhofer ISE hat das in echten Bestandsgebäuden gemessen:
| Kombination | Anteil des Strombedarfs aus eigener Erzeugung (Autarkie) |
|---|---|
| Wärmepumpe + Photovoltaik | 25 bis 40 % |
| Wärmepumpe + Photovoltaik + Batteriespeicher | 32 bis 62 % |
Quelle: Fraunhofer ISE, Feldtest „WP-QS im Bestand“, 2025.
Was ein Speicher kann – und was nicht
Das kann er:
- Mittags gespeicherten Solarstrom abends und nachts liefern: für Kochen, Licht, Fernseher, die Warmwasserbereitung der Wärmepumpe und das Laden des E-Autos.
- Den Eigenverbrauch eines typischen Einfamilienhauses von rund 30 auf 60 bis 70 Prozent steigern.
- Mit einem dynamischen Stromtarif in günstigen Stunden aus dem Netz laden, wenn das System das unterstützt und effizient genug ist.
- Je nach Modell bei Stromausfall eine Notstrom- oder Ersatzstromversorgung übernehmen.
Das kann er nicht:
- Sommerstrom in den Winter bringen. Ein Heimspeicher gleicht Tag und Nacht aus, nicht die Jahreszeiten. Im Januar erzeugt die Photovoltaikanlage nur einen Bruchteil des Sommerertrags. Die Wärmepumpe läuft dann überwiegend mit Netzstrom. Am meisten bringt der Speicher im Frühjahr und Herbst, wenn noch geheizt wird und die Sonne schon oder noch genug liefert.
- Sich immer rechnen. Ein zu großer Speicher wird nie voll und amortisiert sich nie.
Die richtige Größe
Faustregeln für den Einstieg:
- etwa 1 kWh Speicherkapazität je 1.000 kWh Jahresstromverbrauch (Haushalt plus Wärmepumpe),
- und nicht mehr als etwa 1 kWh je 1 kWp Photovoltaikleistung.
Beispiel: 4.000 kWh Haushaltsstrom plus 4.500 kWh für die Wärmepumpe und eine 10-kWp-Anlage ergeben einen sinnvollen Speicher von etwa 8 bis 10 kWh. Wer ein E-Auto hat, das tagsüber zu Hause steht, lädt besser direkt aus der Solaranlage. Der Speicher muss dafür nicht größer werden.
Was ein Speicher kostet
- Preis: je nach Anbieter, Größe und Aufwand etwa 300 bis 700 Euro je kWh Speicherkapazität einschließlich Installation. Nachgerüstete Speicher liegen eher am oberen Ende.
- Mehrwertsteuer: Photovoltaikanlagen und Speicher auf und an Wohngebäuden sind von der Mehrwertsteuer befreit (Nullsteuersatz).
- Lebensdauer: Heutige Lithium-Eisenphosphat-Speicher (LFP) schaffen 6.000 bis 10.000 Ladezyklen, also etwa 15 bis 20 Jahre.
- Amortisation: Ein gut bemessener Speicher rechnet sich nach etwa 7 bis 10 Jahren. Mit Wärmepumpe und hohem Stromverbrauch geht es eher schneller.
- Förderung: Einen Bundeszuschuss für Speicher gibt es derzeit nicht. Möglich ist ein zinsgünstiger Kredit der KfW (Programm 270, Erneuerbare Energien – Standard). Einige Länder und Kommunen haben eigene Programme.
Die besten Stromspeicher im unabhängigen Test
Die Stromspeicher-Inspektion 2026 der HTW Berlin (veröffentlicht am 05.03.2026, zusammen mit aquu) hat 12 Speichersysteme von 10 Herstellern unter Laborbedingungen verglichen. Bewertet wird vor allem der System Performance Index (SPI): Er zeigt, wie viel vom möglichen Nutzen eines idealen, verlustfreien Speichers ein System tatsächlich erreicht.
| Kategorie | Testsieger 2026 |
|---|---|
| bis 5 kW, AC-gekoppelt | SAX Power Home Plus |
| bis 5 kW, Hybridwechselrichter | SMA Sunny Boy Smart Energy 5.0 mit Home Storage 6.5 |
| 10 kW | Kostal PLENTICORE G3 M 10 mit BYD Battery-Box Premium HVS 12.8 |
| 10 kW, Effizienzrekord | Fox ESS PQ-H3-Ultra-10.0 mit EQ3300-5, SPI 97 % |
Ebenfalls in der besten Effizienzklasse A mit einem SPI über 95 Prozent waren Systeme von RCT Power, Energy Depot und Fronius.
Warum Effizienz zählt: Laut HTW spart das effizienteste System im Vergleich zum schlechtesten rund 200 Euro pro Jahr. Der Stand-by-Verbrauch lag zwischen 4 Watt und 64 Watt. Das allein macht über 500 kWh im Jahr Unterschied.
Einordnung: An der Inspektion nehmen Hersteller freiwillig teil. Wer fehlt, ist nicht automatisch schlechter, hat sich aber diesem Vergleich nicht gestellt. Fragen Sie Ihren Installateur nach aktuellen Messwerten, zum Beispiel nach dem Effizienzleitfaden für Batteriespeicher.
EB Klein erhält von keinem der genannten Hersteller Provisionen. Die Auswahl beruht ausschließlich auf den veröffentlichten Testergebnissen.
Checkliste für den Kauf
- Effizienz: SPI beziehungsweise Effizienzklasse, Stand-by-Verbrauch unter 10 Watt.
- Garantie: Laufzeit, garantierte Restkapazität und garantierte Energiemenge. Die HTW fand bei 20 Herstellern Restkapazitäten zwischen 60 und 85 Prozent. Das ist ein großer Unterschied.
- Zusammenspiel mit der Wärmepumpe: Kann das Energiemanagement die Wärmepumpe ansteuern (SG-Ready, EEBus)? Ist die Anlage für §14a EnWG und das intelligente Messsystem vorbereitet? Mehr dazu: Wärmepumpe, intelligentes Messsystem und §14a
- Dynamischer Tarif: Unterstützt das System preisoptimiertes Laden aus dem Netz? Laut HTW braucht es dafür einen Systemwirkungsgrad von mindestens etwa 71 Prozent, damit sich das bei typischen Preisunterschieden lohnt.
- Notstrom: Gewünscht? Dann auf echte Ersatzstromfähigkeit achten, nicht nur auf eine einzelne Notstromsteckdose.
- Erweiterbarkeit: Lassen sich später Module ergänzen?
- Fachbetrieb vor Ort: Ein guter Speicher bringt wenig, wenn bei einer Störung niemand kommt.
So gehen Sie vor
- Verbrauch ermitteln: Haushaltsstrom, geplante Wärmepumpe, E-Auto.
- Heizung und Strom gemeinsam planen: Der Heizungsfinder zeigt, ob eine Wärmepumpe zu Ihrem Haus passt. Die kostenlose Quick-Analyse zeigt, welche Schritte sich bei Ihnen lohnen.
- Speicher passend dimensionieren, nicht maximal.
- Mindestens zwei Angebote einholen und anhand der Checkliste vergleichen.
Fazit
Mit einer Einspeisevergütung von 7,70 Cent und Netzstrom um 30 bis 38 Cent ist der Speicher vom Luxus zum wirtschaftlichen Baustein geworden, besonders mit Wärmepumpe und E-Auto. Er macht Sie nicht autark und bringt keinen Sommerstrom in den Winter. Gut bemessen erhöht er den Eigenverbrauch aber deutlich, schützt vor den neuen Einspeiseregeln und rechnet sich in etwa 7 bis 10 Jahren. Bei der Auswahl zählen Effizienz und Garantie mehr als der Markenname.
Alle Angaben ohne Gewähr. Preise sind Richtwerte. Testergebnisse: HTW Berlin, Stromspeicher-Inspektion 2026. Maßgeblich sind die zum Zeitpunkt der Inbetriebnahme geltenden gesetzlichen Regelungen.
Wärmepumpe, Photovoltaik und Speicher wirken am besten zusammen. Der Energiebericht Pro rechnet durch, welche Schritte sich für Ihr Haus lohnen – als PDF.
Energiebericht Pro starten →Battery Storage 2026: Why It Matters So Much with a Heat Pump – and Which Systems Lead in Testing
Anyone who has or is planning a photovoltaic system will sooner or later face the question: Do I need a battery storage system? With a heat pump in the home, the question becomes even more pressing. Here you will find out why the balance between feeding electricity into the grid and self-consumption is shifting fundamentally right now, what a storage system can and cannot do, and which systems come out on top in independent testing. As of: October 1, 2026.
Why Storage Has Become More Important
1. Feeding into the grid barely pays off anymore
| Value per kWh | |
|---|---|
| Feed-in tariff, new system up to 10 kWp with self-consumption (from August 1, 2026) | 7.70 ct |
| Grid electricity, households, average H1 2026 (Destatis) | 37.97 ct |
| Competitive new-customer tariffs (September 2026) | approx. 30 ct |
Every kilowatt-hour of solar power you consume yourself is therefore worth roughly four to five times as much as electricity fed into the grid. Without storage, the midday surplus largely flows into the grid, and in the evening you buy electricity back at high prices.
2. New rules make grid feed-in less attractive
- No tariff during negative electricity prices: For systems commissioned since February 25, 2025, the feed-in tariff is waived during hours with negative exchange prices. These are precisely the sunny midday hours. The tariff period is extended at the back end to compensate.
- Limited feed-in without smart control: New systems without a smart meter and control device may only feed a portion of their output into the grid. Any excess is lost without storage.
- Possible EEG (Renewable Energy Sources Act) reform in 2027: There are discussions about abolishing the fixed feed-in tariff for new systems from 2027 onwards. This has not yet been decided. But the direction is clear: self-consumption beats grid feed-in.
3. Self-consumption increases with a heat pump and electric vehicle
A heat pump in a single-family home often consumes 3,000 to 7,000 kWh of electricity per year. The more of this that comes from your own system, the cheaper your heating costs. Fraunhofer ISE (Fraunhofer Institute for Solar Energy Systems) measured this in real existing buildings:
| Combination | Share of electricity demand from own generation (self-sufficiency) |
|---|---|
| Heat pump + photovoltaics | 25 to 40 % |
| Heat pump + photovoltaics + battery storage | 32 to 62 % |
Source: Fraunhofer ISE, field study "WP-QS im Bestand", 2025.
What a Storage System Can – and Cannot – Do
What it can do:
- Deliver solar power stored at midday in the evening and at night: for cooking, lighting, television, hot water preparation by the heat pump, and charging the electric vehicle.
- Increase the self-consumption of a typical single-family home from around 30 to 60 to 70 percent.
- With a dynamic electricity tariff, charge from the grid during low-price hours, provided the system supports this and is efficient enough.
- Depending on the model, provide an emergency or backup power supply in the event of a power outage.
What it cannot do:
- Carry summer electricity into winter. A home storage system balances day and night, not the seasons. In January, a photovoltaic system generates only a fraction of its summer output. The heat pump then runs predominantly on grid electricity. The storage system delivers the most benefit in spring and autumn, when heating is still needed and the sun already or still provides enough energy.
- Always pay off financially. An oversized storage system never fills up and never pays for itself.
The Right Size
Rules of thumb to start with:
- approximately 1 kWh of storage capacity per 1,000 kWh of annual electricity consumption (household plus heat pump),
- and no more than approximately 1 kWh per 1 kWp of photovoltaic output.
Example: 4,000 kWh of household electricity plus 4,500 kWh for the heat pump and a 10 kWp system suggest a sensible storage size of around 8 to 10 kWh. Those who own an electric vehicle that is parked at home during the day are better off charging it directly from the solar system. The storage system does not need to be larger for this purpose.
What a Storage System Costs
- Price: depending on the provider, size and complexity, approximately €300 to €700 per kWh of storage capacity including installation. Retrofitted storage systems tend to be at the upper end.
- VAT: Photovoltaic systems and storage systems on and in residential buildings are exempt from VAT (zero tax rate).
- Service life: Today's lithium iron phosphate (LFP) storage systems achieve 6,000 to 10,000 charge cycles, equating to approximately 15 to 20 years.
- Payback period: A well-sized storage system pays for itself after approximately 7 to 10 years. With a heat pump and high electricity consumption, this tends to happen sooner.
- Funding: There is currently no federal subsidy for storage systems. A low-interest loan from KfW (Kreditanstalt für Wiederaufbau – Germany's state development bank; Programme 270, Renewable Energies – Standard) is available. Some federal states and municipalities have their own programmes.
The Best Battery Storage Systems in Independent Testing
The HTW Berlin (Berlin University of Applied Sciences) Battery Storage Inspection 2026 (published on March 5, 2026, together with aquu) compared 12 storage systems from 10 manufacturers under laboratory conditions. The primary assessment criterion is the System Performance Index (SPI): it shows how much of the potential benefit of an ideal, lossless storage system a given system actually achieves.
| Category | Test winner 2026 |
|---|---|
| Up to 5 kW, AC-coupled | SAX Power Home Plus |
| Up to 5 kW, hybrid inverter | SMA Sunny Boy Smart Energy 5.0 with Home Storage 6.5 |
| 10 kW | Kostal PLENTICORE G3 M 10 with BYD Battery-Box Premium HVS 12.8 |
| 10 kW, efficiency record | Fox ESS PQ-H3-Ultra-10.0 with EQ3300-5, SPI 97 % |
Systems from RCT Power, Energy Depot and Fronius were also in the top efficiency class A with an SPI above 95 percent.
Why efficiency matters: According to HTW Berlin, the most efficient system saves approximately €200 per year compared to the least efficient one. Standby consumption ranged between 4 watts and 64 watts. That difference alone amounts to over 500 kWh per year.
Context note: Manufacturers participate in the inspection on a voluntary basis. Any manufacturer not represented is not automatically inferior, but has not submitted to this comparison. Ask your installer for current measured values, for example based on the efficiency guide for battery storage systems.
EB Klein receives no commissions from any of the manufacturers mentioned. The selection is based solely on the published test results.
Checklist for Purchasing
- Efficiency: SPI or efficiency class, standby consumption below 10 watts.
- Warranty: Duration, guaranteed residual capacity and guaranteed energy throughput. HTW Berlin found residual capacities ranging from 60 to 85 percent across 20 manufacturers. That is a significant difference.
- Compatibility with the heat pump: Can the energy management system control the heat pump (SG-Ready, EEBus)? Is the system prepared for §14a EnWG (Energy Industry Act) and the smart metering system? More on this: Heat pump, smart metering system and §14a
- Dynamic tariff: Does the system support price-optimised charging from the grid? According to HTW Berlin, this requires a system efficiency of at least around 71 percent for it to be worthwhile given typical price differentials.
- Backup power: Required? If so, look for genuine backup power capability, not just a single emergency power socket.
- Expandability: Can modules be added at a later stage?
- Local specialist installer: A high-quality storage system is of little use if no one comes out when a fault occurs.
How to Proceed
- Determine your consumption: household electricity, planned heat pump, electric vehicle.
- Plan heating and electricity together: The Heizungsfinder (heating finder) shows whether a heat pump is suitable for your home. The free quick analysis shows which steps are worthwhile for you.
- Size the storage system appropriately, not to the maximum.
- Obtain at least two quotes and compare them using the checklist.
Conclusion
With a feed-in tariff of 7.70 cents and grid electricity at around 30 to 38 cents, battery storage has evolved from a luxury item into an economically sound component – especially in combination with a heat pump and electric vehicle. It will not make you fully self-sufficient and cannot carry summer electricity into winter. However, when properly sized, it significantly increases self-consumption, protects against the new feed-in rules, and pays for itself in around 7 to 10 years. When making your selection, efficiency and warranty matter more than the brand name.
All information without guarantee. Prices are guideline values. Test results: HTW Berlin, Battery Storage Inspection 2026. The statutory regulations in force at the time of commissioning are decisive.
Heat pumps, photovoltaics and battery storage work best together. The Energiebericht Pro calculates which steps are worthwhile for your home – as a PDF.
Start Energiebericht Pro →The Energiebericht Pro shows where your building stands.